CTC Coventry 2026 100km Challenge Ride Formal Risk Assessment

 

COVENTRY CTC FORMAL RISK ASSESSMENT FORM  
Name of Event CTC Coventry 2026 100km Challenge Ride
Date of Event 6th September 2026
Name(s) of Club Official(s) managing the Event Marina Friend and Dave Hearn
Contact Details  marina.friend@coventryctc.org.uk

dave.hearn@coventryctc.org.uk

File name or Webpage for completed Formal Risk Assessment Form https://coventryctc.org.uk/2026-100km-formal-risk-assessment
Date of completion of the Formal Risk Assessment Form  ??th June 2026
Name of Club Official Completing the Formal Risk Assessment Form Marina Friend and Alan Jelley

 

Standard Hazards

  Hazard Risk level Mitigation/Action
MINOR ROADS
MN1 Downhill sections of roads containing lots of gravel and potholes. High Ride Leader to warn riders at a suitable point in advance of the hazard to slow down & take extra care.
MN2 Downhill sections which have a sharp bend or junction that the riders will approach quickly etc. High Ride Leader to warn riders at a suitable point in advance of the hazard to slow down & take extra care.
MN3 Roads liable to flooding (especially during the winter). High The Ride Leader should avoid these when formulating a route, but if the group comes across an unexpected flood, then the Ride Leader should remind everyone that it’s more than likely to be best to cycle down the middle of the road (rather than the sides, so as to avoid submerged potholes & get the benefit from any road camber), & to go through unclipped, reasonably slowly & with a reasonable gap between riders.
MN4 Crossing a ford. High The Ride Leader should have determined whether there’s a footbridge alongside & if so, should recommend that it be used. If no other option but to go through the ford, assess whether the depth is considered too deep – if so, replan a diversion to the route. If deemed safe to cross, then advise to cross singly, in as straight a line as possible, unclipped & not following behind one another closely.
MN5 Risk of ice during winter months, especially on the back lanes after prolonged low temperatures overnight. High Ride Leader should consider an alternative route to avoid narrow/shady lanes & re-route onto the wider roads which will probably have been gritted. Alternatively, & especially if there is a very high risk of encountering ice, then to just cancel the ride.
MN6 Lane full of potholes. Medium Ride Leader to avoid wherever possible.
MN7 Short sections of roads or junctions containing lots of gravel and/or potholes. Medium Ride Leader to warn riders at a suitable point in advance of the hazard.
MN8 A narrow downhill section followed immediately by a steep uphill section, which might cause riders to bunch up due to being in the wrong gear. Medium Ride Leader to warn riders at a suitable point in advance of the hazard.
MN9 Any areas of exposed road that could be affected by high cross-winds. Medium Ride Leader to warn riders at a suitable point in advance of the hazard.
MAJOR ROADS
MJ1 Crossing main roads. High When crossing a main road, riders must be discouraged from using small gaps in traffic & crossing individually, as this could impact on other riders, causing them to make inappropriate & last-minute decisions to cross when unsafe. Best practice is to have a disciplined approach & for the Ride Leader to wait for more than a sufficient gap in the traffic, which will allow the whole group to cross together; or alternatively & where appropriate, the Ride Leader could allocate crossing in sub-groups instead.
MJ2 Crossing a main road at a blind junction. High Ride Leader either replan the route or prepare a suitable method of crossing the junction so as to do so in as safe a manner as possible e.g. nominate one rider to cross first, such that they then have a better view for any approaching traffic & can advise the main group accordingly.
MJ3 Any length of main road where there will be a considerable level of traffic & where that traffic is either travelling very fast or includes heavy goods vehicles. High The Ride Leader should avoid these types of roads all together & should re-plan a more suitable route.
MJ4 Turning right off a main road, especially when the turning is close to a bend. High Ride Leader either replan the route or prepare a suitable method of navigating the junction, giving considerations to: stopping on the left if safe to do so, avoiding riders being stationary in the middle of the road waiting to cross, nominating one rider to cross ahead of the others, such that they then have a better view for any approaching traffic & can advise the main group accordingly.
MJ5 Steep uphill section of main road. High Ride Leader should avoid where possible as the riders will be slower uphill, will be putting more effort in & so may “wobble”/deviate from a straight line more than normal, & will probably get spaced apart, all presenting a greater challenge/risk for traffic to overtake.
MJ6 Any length of A-road. Medium In general Ride Leaders will not plan routes with significant lengths of A-roads. A-roads will generally only be used in short sections so as to link routes across onto the more normal side lanes. Where an A-road must be used for any length, then during the ride the Ride Leader should ensure that the group splits up into sub-groups to enable traffic to pass more easily. Also, it would be advisable that the groups ride at an elevated pace such as to reduce the time that riders are exposed to the risk.
UNPAVED TRACKS
UT1 Unable to predict all the surface conditions that could be encountered High Unpaved surfaces can vary considerable and frequently from section to section. They are also subject to constant change, especially when wet and icy. As it is impossible to identify each hazard before the ride the focus moves to more use of DRA by the Ride Leader during the ride. All participants must keep alert and listen to instructions
UT2 Conditions beyond the skills of the rider and capability of their bike High Ride Leader must convey to potential participants the types of surfaces and conditions likely to be encountered and indicate the probable skill levels and bike capability to address those conditions. Ride Leader needs to check with any participant who does not normally ride unpaved surfaces as to whether of not they are likely to be capable of doing the ride.
UT3 Conditions beyond the capability of participants bike Medium Unpaved tracks typically require bikes with at least wider and treaded tyres. Hardpack tracks, old railway lines, canal towpaths etc are less challenging and just wider tyres are probably okay. Bridleways, tracks through woods, and so on are more challenging and would generally require a more robust bike.
The Ride Leader must convey to potential participants the types of surfaces and conditions likely to be encountered and be available to discuss the bike capability to address those conditions.
UT4 Everyone’s riding capabilities varies and it is not possible for the Ride Leader to select an optimum ‘line’ around or across any feature. High In the pre-ride briefing the Ride Leader to emphasise that each participant is responsible for selecting their own way round or over any feature. If the participant is uncertain then it is acceptable for them to dismount and walk the feature.
UT5 Riding a Canal Towpath Medium Ride Leader to identify sections of the ride using Towpaths, and closely monitor any participants who are nervous around water. It should be seen as acceptable to walk sections where needed.
UT6 Physical and mental demands and onset of fatigue High Riding unpaved surfaces is typically more physically demanding, and the concentration levels are more mentally draining.
The ride plan needs to acknowledge this and the distance / climbing profile needs to be adjusted.
UT7 Remoteness of location in the event of an issue Medium Ride timings should be scheduled so as to give contingency should it be necessary to walk-out from a remote location, say because of a damaged bike.
UT8 Remoteness of location in the event of an emergency High Ride Leader should use location tracking techniques (Map Reference, What3Words, etc) to locate group and be able to convey that location to emergency services in the event of an problem

 

 

 

 ADDITIONAL FACTORS FOR SPECIAL EVENTS

  Hazard Risk level Mitigation/Action
SPECIAL EVENTS
SE1 These rides venture into some parts of our region which we infrequently ride and we do not have frequent updates on the riding conditions of some parts of the route. High Ride Leaders to trial ride the route to ‘prove’ it and to review it for the Risk Assessment 

Ride Leaders leading each sub-group to be familairised with the route to they are comfortable with the routing and direction and hazards.

On such a long ride it is impossible to specifically indentify and plan for each hazard. It is important that the Ride Leaders leading each sub-group are effectively trained in Dynamic Risk Assessment techniques, and that they are continuously using these techniques to assess and mitigate risks throughout the ride.

SE2 These rides undoubtedly have a lure of doing a ‘challenging’ ride and as such are likely to encourage some riders to exceed their normal levels of effort. As such there is likely to be increased chance of injury and over-exertion. Also at the limit Riders are more likely to have an accident. High Ride Leaders to all be trained in and prepared to give First Aid. 

Sweep vehicle to be available to pickup any ‘walking wounded’ type injusries

All Ride Leaders to be practiced in using What3Words to indentify to emergency Services where an accident has happened

Entry Form to request informationon prexisting medical conditionsThere are two Ride Leader to warn riders at a suitable point in advance of the hazard to slow down & take extra care.

SE3 A longer ride will need additional hydration and energy replenishment  Medium Ride planned to have regular formal refreshment stops 

Riders to be encouraged to bring additional hydration and snacks with them.

As part of the DRA protocol Ride Leaders to be requested to informal monitoring of all riders 

SE4 The longer distances also potentially lead to an increased chance of Bike failure.. Medium Participants to be encouraged to check their bikes before the Ride. Additionally to be requested to bring along a range of spares to address common bike issues.

 

 

MENU